The BD-05TF250WB is a compact 24V liquid pump designed for low-flow dosing, sampling, and OEM fluid handling applications, delivering 250 mL/min water flow and 0.8 bar maximum water pressure. Its brushless DC motor, self-priming diaphragm structure, and corrosion-resistant PPS, PTFE, and FFKM fluid path make it suitable for chemically demanding liquid transfer and long-duty operation.
| Voltage | 24 V DC |
|---|---|
| Max Flow | 250 mL/min |
| Max Vacuum | ≥ -30 kPa |
| Max Pressure | 0.8 bar (water), 50 kPa (gas) |
| Motor | DC Brushless Motor |
| Weight | 200 g |
The BD-05TF250WB is a compact 24V liquid pump designed for low-flow dosing, sampling, printing, and analytical fluid systems. Its diaphragm structure supports self-priming, gas-liquid compatible operation, and temporary dry running, while the brushless DC motor is suited to OEM equipment requiring longer operating cycles.
With 250 mL/min water flow, 0.8 bar maximum water pressure, and a PPS, PTFE, and FFKM fluid path, this model is particularly suitable for chemically demanding applications where controlled low flow, compact installation, and extended motor life are more important than high transfer capacity.
The following specifications help engineers evaluate flow, pressure, suction capability, chemical compatibility, motor life, and installation requirements before sample testing.
| Basic Information | |
|---|---|
| Model | BD-05TF250WB |
| Type | Corrosion-Resistant Liquid Pump |
| Structure | Micro Diaphragm Liquid Pump |
| Rated Voltage | 24 V DC |
| Liquid Performance | |
| Free Water Flow | 250 mL/min (0.066 gpm) |
| Max Water Pressure | 0.8 bar (11.6 psi / 800 mbar / 0.08 MPa) |
| Water Pressure Head | 8 m |
| Water Suction Head | 2 m |
| Gas Performance | |
| Max Gas Pressure | 50 kPa (7.25 psi / 500 mbar) |
| Max Gas Vacuum | ≥ -30 kPa (-8.9 in.Hg / -300 mbar / -225 mmHg) |
| Electrical & Motor Data | |
| Motor Type | DC Brushless Motor |
| Load Current | 0.3 ± 0.1 A |
| Noise | 55 dB |
| Lifetime | 8000 h |
| Mechanical Data | |
| Dimensions | 82.6 × 31.1 × 60.4 mm (3.25 × 1.22 × 2.38 in) |
| Weight | 200 g (0.44 lb) |
| Recommended Tubing | ID4 mm / OD6 mm |
| Operating Conditions | |
| Ambient Temperature | 5°C to 40°C |
| Fluid Temperature | 10°C to 60°C |
The performance, electrical, dimensional, and operating-condition values above are taken from the BD-05TF250WB specification.
Reference Performance:
The datasheet specifies liquid performance using water, together with maximum gas pressure and vacuum values. For OEM sample validation, evaluate the pump using the actual working medium and final fluid-path configuration.
System Validation:
Flow, suction performance, pressure, and vacuum should be checked together with the actual tubing length, inlet filter, fittings, height difference, and downstream resistance used in the equipment.
Lifetime Validation:
The datasheet specifies an 8000 h lifetime. Actual service life can vary with liquid properties, pressure load, operating temperature, duty cycle, and system conditions.
The BD-05TF250WB features a PPS, PTFE, and FFKM wetted-material configuration designed for handling compatible chemical liquids in compact OEM fluid systems.
| Component | Material / Feature |
|---|---|
| Pump Head | PPS |
| Diaphragm | PTFE |
| Valve | FFKM |
The combination of PPS, PTFE, and FFKM provides a stronger starting point for chemical compatibility than conventional general-purpose elastomer configurations. Final compatibility should still be checked against the actual liquid, concentration, temperature, and required service life.
For OEM projects with specific motor, material, or wiring requirements, selected components can be customized based on the standard BD-05TF250W platform.
| Item | Customization Options |
|---|---|
| Motor Type | Standard brushed DC motor; brushless DC motor available |
| Materials | Standard: PPS pump head, PTFE diaphragm, and FFKM valves; optional EPDM diaphragm and EPDM valves |
| Wiring | Custom cable length and wire configuration |
| Branding | Private label or customer-specific marking |
BODENFLO supports motor and material customization, wiring adjustments, and private labeling to meet specific OEM application requirements.
The BD-05TF250WB is designed for compact OEM systems requiring low-flow liquid transfer, self-priming, and chemical-resistant wetted materials.
BODENFLO combines pump manufacturing, engineering support, and flexible OEM services to help customers integrate miniature liquid pumps into their equipment.
OEM evaluation of this type of pump typically focuses on chemical compatibility, motor life, priming behavior, and compact integration.
Application: Ink and cleaning-fluid transfer
Feedback Focus: The PPS, PTFE, and FFKM liquid path is useful when the fluid system requires more chemical resistance than a standard EPDM configuration.
Application: Reagent and sample transfer
Feedback Focus: The 250 mL/min flow range and compact 200 g body are well suited to small analytical modules where excessive pump capacity is unnecessary.
Application: Cleaning and waste-fluid handling
Feedback Focus: The brushless motor and self-priming diaphragm structure are useful for repeated operating cycles and intermittent fluid-path conditions.
Install a filter rated at 30 μm or finer at the pump inlet to prevent particle ingress. ID4 mm / OD6 mm tubing is recommended, and inlet connections should remain well sealed to avoid loss of suction performance.
For bottom mounting, use the 4 × Φ2.4 mm holes with 6.8 mm depth and M3 self-tapping screws for through-board fixation. Side mounting uses 2 × R1.7 mm through holes with M3 screws.
The standard fluid path uses PPS, PTFE, and FFKM. Ambient temperature should remain within 5°C to 40°C, while fluid temperature is specified at 10°C to 60°C. Confirm compatibility with the actual medium before long-term testing.
[BD-05TF250WB 24V Liquid Pump Datasheet (PDF)]
| Sample Orders | Order Quantity | Production Lead Time | Shipping Options |
|---|---|---|---|
| Available from 1 unit | No fixed MOQQuantity-based pricing available | Samples: 2–5 working daysBulk orders: 15–30 working days | DHL/FedEx/UPS Express: 5–8 daysAir freight: 7–10 daysSea freight: 30–50 days |
Final pricing, production lead time, and shipping time depend on the model, order quantity, customization requirements, and destination.
The 250 mL/min value is the free water flow specification. Actual flow can decrease because of higher liquid viscosity, inlet restriction, filters, long tubing, small tubing diameter, suction height, or outlet back pressure. The complete fluid circuit should therefore be evaluated during sample testing.
The diaphragm pump uses internal valves to control fluid movement. Whether an additional external check valve is required depends on the system’s backflow prevention, pressure-holding, and fluid-isolation requirements.
The standard fluid path uses PPS, PTFE, and FFKM, materials selected for chemical-resistant applications. However, suitability still depends on the specific chemical, concentration, temperature, exposure time, and operating conditions, so sample compatibility testing is recommended before final approval.
Both models offer 250 mL/min maximum water flow and 0.8 bar maximum water pressure. The main difference is the motor: BD-05TF250WB uses a brushless DC motor, while BD-05TF250W uses a brushed motor.
The brushless version eliminates mechanical brush wear and has an 8,000-hour specified lifetime, making it worth considering for applications requiring longer operating cycles
Yes. The following models provide useful alternatives depending on the project priority:
BODENFLO can compare these models based on working medium, flow, pressure, suction requirement, service life, and installation space.
If you are developing printing equipment, biochemical analyzers, chemical analysis systems, or compact dosing and sampling modules, BODENFLO can support pump selection, material review, customization, and sample evaluation.
What We Can Provide
Email: info@bodenpump.com
Website: bodenpump.com
Micro diaphragm pump mini compressor maufacturer
Typically replies within minutes
Any questions related to 24V Liquid Pump 250 mL/min Corrosion-Resistant BLDC Diaphragm Pump BD-05TF250WB | BODENFLO?
WhatsApp Us
🟢 Online | Privacy policy
WhatsApp us
We will contact you within 8 hours, please pay attention to the email with the suffix “@bodenpump.com”.