The BD-05TF480WB is a compact DC liquid pump designed for CIJ printer systems and precision fluid handling, delivering 480mL/min stable flow with brushless motor efficiency, PWM controllability, and reliable gas-liquid transfer performance for OEM integration.
| Voltage | 6 V / 12 V / 24 V DC |
|---|---|
| Max Flow | 480 mL/min (water), 4 L/min (gas) |
| Max Vacuum | –60 kPa |
| Max Pressure | 2.5 bar (water), 80 kPa (gas) |
| Motor | DC Brushless Motor |
| Max Power | 7 W |
| Weight | 200 g |
The BD-05TF480WB is a small DC liquid pump based on a brushless motor and diaphragm structure, engineered for precise fluid handling in inkjet systems, analytical instruments, and OEM integration platforms. It supports both gas and liquid transfer in compact equipment where space and control precision are critical.
With PWM-compatible operation and a lightweight design, this small liquid pump delivers controlled flow performance for CIJ printer modules and laboratory analyzers. Its diaphragm-driven mechanism ensures consistent metering behavior, making it suitable for engineering teams focusing on compact system integration and long-cycle industrial use.
To help you judge whether BD-05TF480WB is suitable for your system, we’ve organized the key specifications below.
You can evaluate flow, pressure, vacuum, power, and size to confirm technical compatibility with your equipment.
| Basic Information | |
|---|---|
| Model | BD-05TF480WB |
| Type | DC Liquid Pump |
| Structure | Diaphragm Pump |
| Voltage Range | 6 V / 12 V / 24 V |
| Liquid Performance | |
| Free Water Flow | 480 mL/min (0.127 gpm) |
| Max Water Pressure | 2.5 bar (36.3 psi / 2500 mbar / 0.25 MPa) |
| Water Pressure Head | >15 m |
| Water Suction Head | 6 m |
| Gas Performance | |
| Free Gas Flow | 4 L/min (0.141 cfm) |
| Max Gas Pressure | 80 kPa (11.6 psi / 800 mbar) |
| Max Gas Vacuum | -60 kPa (-17.7 in.Hg / -600 mbar / -450 mmHg) |
| Electrical & Motor Data | |
| Motor Type | DC Brushless Motor |
| Max Power | 7 W |
| Noise | 55 dB |
| Lifetime | 8000 h |
| Mechanical Data | |
| Dimensions | 75 × 31.1 × 60.4 mm (2.95 × 1.22 × 2.38 in) |
| Weight | 200 g(0.44 lb) |
| Recommended Tubing Size | ID4 mm / OD6 mm |
| Operating Conditions | |
| Ambient Temperature | 5°C to 40°C |
| Fluid Temperature | 10°C to 60°C |
Water Flow Measurement:
Water flow is measured using a high-precision miniature electromagnetic flowmeter (electromagnetic induction volumetric flowmeter).
The test setup includes approximately 1 m inlet and outlet tubing to simulate practical installation conditions.
Noise Measurement:
Noise is measured at a distance of 1 m from the pump during normal operation under standard working conditions.
Lifetime Testing:
Lifetime is evaluated under continuous 24-hour no-load operation, with both inlet and outlet open to atmosphere (ambient pressure conditions).
The standard material configuration is designed to balance chemical compatibility, stable operation, and long service life in typical OEM applications.
| Component | Material / Feature |
|---|---|
| Pump Head | PA66 |
| Diaphragm | EPDM |
| Valve | EPDM |
For applications involving more demanding media, longer life targets, or special integration requirements, customized material options are also available.
If your system requires specific electrical configurations, material compatibility, or installation interfaces, selected items can be customized to better match your application.
| Item | Customization Options |
|---|---|
| Voltage | 6 V / 12 V / 24 V selectable or project-specific adjustment |
| Motor Type | Brushless DC / optimized motor tuning for duty cycle requirements |
| Materials | EPDM / PTFE / FKM optional for chemical compatibility |
| Wiring | Standard leads / customized length / shielded cable |
| Connector | Plug type / waterproof connector / OEM-defined interface |
| Tubing | ID/OD size adjustment based on system design |
| Branding | Private label / logo customization available |
| Mounting | Customized brackets or installation structure support |
BODENFLO also supports integrated customization, including connectors, tubing, and mounting brackets, allowing the pump to be delivered as a ready-to-install module.
This reduces assembly time, simplifies system integration, and helps OEM customers accelerate product development.
This model is commonly used in compact OEM equipment requiring controlled liquid transfer, gas-liquid handling, and integration with precision fluid systems.
In OEM equipment development, the key challenge is not only selecting a suitable pump, but ensuring it can be integrated, validated, and supplied consistently in real production environments. BODENFLO supports customers with both product engineering and project-level assistance to reduce development uncertainty and integration risk.
We help evaluate flow, pressure, voltage, and installation constraints based on real system conditions, ensuring the selected model fits actual operating requirements instead of catalog-only comparison.
For ink, reagents, or chemical media, we help assess whether standard EPDM structures are sufficient or if upgraded materials like PTFE or FFPM are required for safer long-term operation.
Connectors, tubing, and mounting structures can be pre-matched with your equipment layout, helping reduce assembly workload and improving installation consistency in OEM production.
We support early-stage testing to verify pump behavior under real operating conditions, helping reduce redesign risk before scaling to mass production.
From cost-sensitive prototypes to long-life industrial systems, motor type and structural configuration can be adjusted to match performance or budget priorities.
We support transition from sample approval to mass production with consistent manufacturing capability, helping ensure stable delivery in long-term projects.
The following feedback reflects how customers use BD-05TF480WB in real OEM equipment and what they value most during system integration and long-term operation.
Application: Ink circulation system
Feedback: The pump maintains consistent flow during continuous operation and integrates well into compact ink system layouts.
Application: Chemical analysis equipment
Feedback: The compact structure simplifies installation, and fluid transfer performance matches our reagent handling requirements.
Application: Liquid sampling device
Feedback: It is easier to integrate than previous solutions, especially in space-limited designs requiring stable micro-fluid control.
1.Install a filter with a minimum filtration accuracy of ≤30 μm at the pump inlet to prevent particle ingress
2.Bottom mounting: 4xΦ2.4 mm holes (depth 6.8 mm), recommended to use M3 self-tapping screws for through-board fixation
3.Side mounting: 2xR1.7 mm through holes, use M3 screws for through-board installation and secure fixation
[BD-05TF480WB Micro Liquid Pump Specification (PDF)]
It is designed for clean liquid transfer such as ink, water-based reagents, and general fluids. For corrosive or special media, PPS, PTFE, and FFPM material options are available.
Yes. The 480 mL/min flow and oil-free diaphragm design support stable ink delivery, helping maintain consistent flow in compact printing systems.
Yes. Voltage, materials, connectors, tubing, and wiring can be customized. Pre-assembled solutions are also available to simplify system integration.
Yes. Small quantities are supported for testing and evaluation, with flexible scaling for OEM production.
If you are working on CIJ printing equipment, biochemical analyzers, or compact liquid handling systems, the BD-05TF480WB offers a practical platform for stable gas-liquid transfer and OEM system integration.
📧 Email: info@bodenpump.com
🌐 Website: https://bodenpump.com
We will contact you within 8 hours, please pay attention to the email with the suffix “@bodenpump.com”.
