12V Liquid Pump 600mL/min 7W Wide Format Printer Pump BD-05TF600W BODENFLO

The BD-05TF600W is a compact small liquid pump designed for wide format printer ink circulation, delivering up to 600 mL/min flow and 2.5 bar pressure with a durable diaphragm structure and cost-effective brushed motor, making it suitable for OEM systems requiring gas-liquid compatibility and compact integration.

Additional information

Voltage

6 / 12 / 24 V DC
Max Flow

600 mL/min (water), 4 L/min (gas)
Max Vacuum

-78 kPa
Max Pressure

2.5 bar (water), 1 bar (gas)
Motor

DC Brush Motor
Max Power

7 W
Weight

200 g
Ask for quote
Contents hide
1 Overview of BD-05TF600W 12V Liquid Pump
2 Key Features of BD-05TF600W wide format printer pump
3 Technical Specifications of BD-05TF600W Liquid Pump
4 Standard Materials & Reliability
5 OEM Customization Options
6 Typical Applications of BD-05TF600W Single-head diaphragm pump
7 Why Choose BODENFLO for Your OEM Pump Project
8 Customer Feedback from OEM Applications
9 Installation & Usage Notes
10 Downloads – Datasheet
11 FAQ – BD-05TF600W 12V Liquid Pump
12 Contact BODENFLO – OEM Micro Liquid Pump Solutions

Overview of BD-05TF600W 12V Liquid Pump

The BD-05TF600W is a small liquid pump developed for controlled fluid transfer in inkjet systems, analyzers, and OEM-integrated equipment, where space constraints and media compatibility are key design factors. Based on a diaphragm structure, it enables gas-liquid dual-use operation with self-priming capability, supporting applications that require both liquid circulation and intermittent suction performance.

Equipped with a brush motor drive, this pump delivers up to 600 mL/min flow and 2.5 bar pressure, while maintaining compact dimensions and low vibration characteristics. Its material combination, including PA66 and EPDM, supports standard chemical compatibility, offering OEM engineers a practical solution for integrating compact liquid pump modules into customized fluid systems.

Key Features of BD-05TF600W wide format printer pump

  • Diaphragm Pump Structure – Ensures clean fluid transfer with media isolation, reducing contamination risk in inkjet and analyzer systems
  • Gas-Liquid Dual Capability – Supports both liquid pumping and gas handling, allowing greater flexibility in OEM system design
  • Self-Priming & Dry-Run Capability – Simplifies installation and protects the pump during intermittent or unstable fluid supply conditions
  • Compact Integrated Design – Enables easy integration into space-limited equipment such as printers and analytical devices
  • Low Noise Operation (50 dB) – Improves end-user experience in equipment where acoustic control is important
  • Optimized Flow & Pressure Output – Delivers up to 600 mL/min and 2.5 bar, meeting typical requirements for ink circulation and fluid transfer
  • Material Flexibility for Chemical Resistance – Optional PPS, PTFE, and FFPM components extend compatibility with more aggressive media

Technical Specifications of BD-05TF600W Liquid Pump

To help you judge whether BD-05TF600W is suitable for your system, we’ve organized the key specifications below.
Pay close attention to flow, pressure, vacuum, power, and size when checking fit for your application.

Basic Information
Model BD-05TF600W
Type Small Liquid Pump
Structure Single-head Diaphragm Pump
Voltage Range 6 V / 12 V / 24 V DC
Liquid Performance
Free Water Flow 600 mL/min (0.158 gpm)
Max Water Pressure 2.5 bar (36.3 psi / 2500 mbar / 0.25 MPa)
Water Pressure Head >15 m
Water Suction Head 7 m
Gas Performance
Free Gas Flow 4 L/min (0.141 cfm)
Max Gas Pressure 1 bar (14.5 psi / 1000 mbar / 0.1 MPa)
Max Gas Vacuum -78 kPa (-23 in.Hg / -780 mbar / -585 mmHg)
Electrical & Motor Data
Motor Type DC Brush Motor
Max Power 7 W
Noise 50 dB
Lifetime 3000 h
Mechanical Data
Dimensions 82.6 × 31.1 × 58.1 mm (3.25 × 1.22 × 2.29 in)
Weight 200 g(0.44 lb)
Recommended Tubing Size ID 4 mm, OD 6 mm
Operating Conditions
Ambient Temperature 5°C to 40°C
Fluid Temperature 10°C to 60°C

Testing Conditions & Measurement Standards

Water Flow Measurement:
Water flow is measured using a high-precision miniature electromagnetic flowmeter (electromagnetic induction volumetric flowmeter).
The test setup includes approximately 1 m inlet and outlet tubing to simulate practical installation conditions.

Noise Measurement:
Noise is measured at a distance of 1 m from the pump during normal operation under standard working conditions.

Lifetime Testing:
Lifetime is evaluated under continuous 24-hour no-load operation, with both inlet and outlet open to atmosphere (ambient pressure conditions).

Standard Materials & Reliability

The standard configuration is designed to balance chemical compatibility, stable operation, and long service life in typical OEM applications.

Component Material / Feature
Pump Head PA66
Diaphragm EPDM
Valve EPDM

For applications involving more demanding media, longer life targets, or special integration requirements, customized material options are also available.

OEM Customization Options

If your system requires specific electrical configurations, material compatibility, or installation interfaces, selected items can be customized to better match your application.

Customization Item Available Options / Adjustment
Voltage 6 V / 12 V / 24 V DC
Materials Pump head, diaphragm, and valve material upgrades available (e.g., PA, EPDM)
Wiring Custom length and termination options
Connector OEM-specific electrical connectors available
Tubing ID/OD sizing adjustment based on system requirements
Branding Private label / OEM branding support
Mounting Custom mounting structure available

BODENFLO also supports integrated customization, including connectors, tubing, and mounting brackets, allowing the pump to be delivered as a ready-to-install module.
This reduces assembly time, simplifies system integration, and helps OEM customers accelerate product development.

Typical Applications of BD-05TF600W Single-head diaphragm pump

This model is commonly used in OEM equipment where controlled liquid transfer, gas-liquid handling, and compact integration are required. The following application examples help you quickly evaluate whether it matches your system function requirements.

  • Digital Printing Equipment – Used to circulate and transfer ink within wide format printing systems for consistent supply control.
  • Biochemical Analyzers – Provides precise micro-liquid delivery for reagent transport and fluid sampling processes.
  • Microplate Washing Equipment – Drives stable liquid injection and drainage during automated washing cycles.
  • Chemical Analysis Systems – Supports controlled fluid movement for sample handling and analytical testing processes.
  • Liquid Sampling Devices – Enables accurate suction and transfer of small liquid volumes in compact OEM instruments.
  • Cleaning & Disinfection Equipment – Delivers controlled liquid dosing for internal flushing and surface cleaning functions.

Back to top

Related products

Find the Solution And Quote

Ask For A Quick Quote

We will contact you within 8 hours, please pay attention to the email with the suffix “@bodenpump.com”.